HD-328H adhesive

HD-328H

Special glue series product

Application

HD-328H is a single component adhesive which is fit for bonding damper, paper edge and frame of loudspeaker. It is also used for bonding high frequency tweeter and bracket.

Characteristics

Non-webbingeasy operationfast cure and good economically.

Typical properties

Operation instructions

1. Stir before use, you can use by glue gun or by hand.

Cautions

1. The viscosity will increase after a long storage time. It can be diluted with toluene as thinner, youd better do some tests (bases the ratio) and should be used in two hours after diluted.

2. The working place should be well ventilation.

3. It is inflammable, keep it away from fire. To avoid sparking, youd better not dig hole on the drum.

4. Avoid contact with the skin, in case of contact with skin, flush with soap water.

5. Store in a cool, dry place (under 25).

6. The testing time is 72 hours after applied (ambient temperature 25-35).when the temperature below 20, you can roast or heat (temperature should be 35-45) to accelerate the cure speed and assure the product use properly.

Package

15kg/can

Note

The data contained herein are obtained by many experiments and are believed to be reliable. We cannot assume responsibility for the results obtained by different conditions whose methods we have no control, always verify the suitability of the product for the job to be done before application. We specially declaim any liability for consequential and incidental damages of particular purpose.

If you meet any other questions, please contact us to request more information. We will try our best to meet your require.