HD-800AB adhesive

HD-800AB

Two-Component acrylic Adhesive for Magnetic assembly of Loudspeaker

Application

HD-800AB is a two component structural acrylic adhesive which is specially for bonding T yoke, magnet and washer of loudspeakers.

Characteristics

Fast curing at room temperature, easy to use,

High impact resistance and shear strength, good environmental resistance and with broadly workability.

Typical properties

Operation instructions

Surface to be bonded should clean. (Wipe off moisture, dirt, grease, and rust).

The mix ratio is 1:1, mixed thoroughly and then applied to bonded surface. Joint together if necessary, you can rotate and mix and then to bonded.

If there is an automatic dispensing machine that will be better.

If the temperature below 20, the curing time will be extended. You can heat it (temperature should be 45∼55) to accelerate the cure speed. It should be test it 24 hours later. (Ambient temperature: 25∼35).

Cautions

1. The working place should be well ventilation.

2. It is inflammable, keep away from fire.

3. Prevent two components from getting into touch .

4. Avoid contact with the skin, in case of contact with skin, immediately rinse with plenty of water and soap.

5. Store it in a cool place (under 25) and avoid sunlight.

Package

2.5kg/bottle,5kg/group,15kg/box

Note

The data contained herein are obtained by many experiments and are believed to be reliable. We cannot assume responsibility for the results obtained by different conditions whose methods we have no control, always verify the suitability of the product for the job to be done before application. We specially declaim any liability for consequential and incidental damages of particular purpose.

If you meet any other questions, please contact us to request more information. We will try our best to meet your require.