Black RTV Silicone sealant

This silicone gasket maker can make almost any gasket instantly, so it can replace
most cut gaskets. It forms to any shape instantly and cures fast. After curing,
it resists cracking, shrinking and migration caused by thermal cycling. Also,
it can work up to 280°C and has good resistance of oil, water, anti-freeze and
transmission fluid. 
User's Guide: 

1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease; 
2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size; 
3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. Completely surround all bolt holes; 
4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 

5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond. 
Notes: 

1. Leave thickness for gasket when reassembling

2. Sealant releases acetic acid (vinegar-like odor), Used with adequate ventilation.

3. Replace the cap after use

package:85g/pcs